GRAPHICAL CUSTOMER INTERFACE GKI300

GKI300 - Graphical Customer Interface

LAMTEC’s GKI300 Graphical User Interface offers data visualization for combustion plants.

By using a 10-inch touchscreen monitor, the GKI300 is enabling a graphical representation and burner control:

  • ETAMATIC
  • ETAMATIC OEM
  • FMS
  • BT300

Purpose:

GKI300 is comprised of an independent PC with a 10-inch touchscreen. For control purposes, LAMTEC VISIOCONTROL software is used, which is usually pre-installed. After start-up, a graphical representation of the burner would be displayed for the user to visualize. The following menus are available:

  • Refresh
  • Burner operation
  • Fuel-air ratio curves
  • Firing rate controller
  • CO/O2 control
  • NEMS fault indication
  • Close application
  • Data setting
  • Fault history

All relevant information about the combustion plant would be displayed. At the same time, setpoint curves can be read and firing rate values can be preselected. The burner itself can be switched on or shut-down by GKI300. In the fault history list, the last 10 faults are saved and can be displayed.

Graphical overview:

GKI300 - Customer Interface overview connections




Technical Data:

LCD size:10,4"
Max. resolution:1024 x 768 pixels
Mounting:Panel mount, rack, and swivel arm
VESA 100 x 100 mm/3.93" x 3.93" in
Touchscreen:Resistive, 4-wired
CPU (processor):Intel® Atom™ N2600 (optional N2800)
Memory:2 GB 533 MHz DDR3 SO-DIMM pre-installed (4 GB max. f. N2800)
Power supply:8-36 V
Power consumption:7 W
Operation temperature:-25 °C … +75 °C/-13 °F ... +167 °F
Dimensions (HxWxD):202 x 235 x 31 mm/7.95" x 9.25" x 1.22" in
Weight:2,2 kg/4.85 lb

Download