HOT WATER AND STEAM BOILERS
FLAME MONITORING DEVICE F130I
Flame monitoring device for main and Ignition flame ;
Ionization-based flame monitoring;
Approved for continuous operation with ionization;
Approved for intermittent operation with UV tubes and LDR sensors;
A two-channel system with electronic self-monitoring;
LED based status display;
Plug-in module for top hat rail assembly;
Designed for installation in control panels;
No modifications needed for country-specific mains frequencies
SIL 3 as per DIN EN 61508-1-7
Purpose:
The F130I flame monitoring device is LAMTEC's new safety system, designed especially for monitoring ignition and main flames. The F130I flame monitoring device by LAMTEC provides operators of industrial firing systems and power plants with a reliable high-tech device for flame monitoring.
The F130I uses ionization to monitor the flame. Optical flame sensors can also be connected to the device. The F130I flame monitoring device is particularly impressive when used for more demanding monitoring requirements, such as monitoring in firing systems with single burner flames. The ionization-based F130I flame monitoring device has been approved for permanent operation.
The evaluation device may only be operated with the approved flame sensors. The F130I is not designed for the direct switch-off fuel valves. The subsequent signal processing must be carried out in the control system, which is adapted to suit the firing system in question.
Selection criteria:
Sensor type | F130I input | For fuel | Continuous operation | Wavelength range |
UV tubes | UV | Gas / Oil | No | 190 … 270 nm |
LDR, visible | LDR | Oil | No | 450 … 800 nm |
LDR, visible | LDR | Oil | No | 400 … 800 nm |
Ionisation | ION | Gas | Yes | - |
Technical data:
Power supply voltage: | 230 VAC +10 % -15 % |
Flame and signal contact: | Floating |
Mains frequency: | 47 Hz … 63 Hz |
Safety time "operation": | tVoff ≤ 1 s |
Mode of operation: | Continuous operation |
Protection class: | IP20 |
Operating temperature: | -20 °C … +60 °C |
Dimensions: | 114 x 120 x 45 mm (WxHxD) |
Weight: | 0,5 kg |
Downloads: